8.8. Configurando o carregador de boot (bootloader)

Isso provavelmente já é funcional, mas é sempre bom saber configurar e instalar o carregador de inicialização em caso dele desaparecer da MBR (Master Boot Record). Isso pode ocorrer depois da instalação de outro sistema operacional, como o Windows. A seguinte informação pode também ajudar você a modificar a configuração do carregador de inicialização caso necessário.

8.8.1. Identificando os Discos

CULTURA udev e /dev/

O diretório /dev/ tradicionalmente hospeda os chamados arquivos “especiais”, destinados a representar os periféricos do sistema (veja barra lateral DE VOLTA AO BÁSICO Permissão de acesso a dispositivos). Tempos atrás, era usado para armazenar todos os arquivos especiais que potencialmente poderiam ser usados. Essa abordagem tinha uma série de inconvenientes entre os quais o fato de restringir o número de dispositivos que alguém poderia usar (devido a lista de nomes codificados), e que era impossível saber quais arquivos especiais eram realmente úteis.

Atualmente, o gerenciamento de arquivos especiais é completamente dinâmico e combina mais com a natureza de encaixe a quente dos dispositivos. O núcleo coopera com o udev (Seção 9.11.3, “Como o udev Funciona”) para criar e apagar os dispositivos quando necessário a medida em que tais dispositivos aparecem ou desaparecem. Por esta razão, /dev/ não precisa ser persistente e é portanto um sistema de arquivos em RAM que inicia vazio e contém apenas entradas relevantes.

The kernel communicates lots of information about any newly added device and hands out a pair of major/minor numbers to identify it. With this udevd can create the special file under the name and with the permissions that it wants. It can also create aliases and perform additional actions (such as initialization or registration tasks). udevd's behavior is driven by a large set of (customizable) rules usually found in /lib/udev/rules.d/ and /etc/udev/rules.d/.

Com nomes atribuídos dinamicamente, você pode assim manter um mesmo nome para um determinado dispositivo, independentemente do conector utilizado ou a ordem da conexão, o que é especialmente útil quando você usa vários periféricos USB. A primeira partição no primeiro disco rígido pode então ser chamada de /dev/sda1 por questões de compatibilidade, ou /dev/root-partition se você preferir, ou ainda as duas opções ao mesmo tempo já que o udevd pode ser configurado para automaticamente criar uma ligação simbólica.

In ancient times, some kernel modules did automatically load when you tried to access the corresponding device file. This is no longer the case, and the peripheral's special file no longer exists prior to loading the module; this is no big deal, since most modules are loaded on boot thanks to automatic hardware detection. But for undetectable peripherals (such as very old disk drives or PS/2 mice), this doesn't work. Consider adding the modules, floppy, psmouse and mousedev to /etc/modules or /etc/modules-load.d/ in order to force loading them on boot.

A configuração do carregador de inicialização tem que identificar os diferentes discos rígidos e suas partições. O Linux usa arquivos especiais “block” armazenados no diretório /dev/, para esse propósito. Desde o Debian Squeeze, o esquema de nomeação para discos rígidos foi unificado pelo kernel Linux, e todos os discos rígidos (IDE/PATA, SATA, SCSI, USB, IEEE 1394) são agora representados por /dev/sd*.

Cada partição é representada por seu número no disco no qual reside: por exemplo, /dev/sda1 é a primeira partição do primeiro disco, e /dev/sdb3 é a terceira partição do segundo disco.

A arquitetura PC (ou “i386”, incluindo seu primo mais moço "amd64") a muito tem sido limitada a usar o formato de tabela de partição "MS-DOS", que apenas permite quatro partições “primarias” por disco. Para ir além desta limitação, sob esse esquema, uma delas tem que ser criada como uma partição “estendida”, e assim conter partições “secundárias” adicionais. Essas partições secundárias são numeradas a partir de 5. Assim a primeira partição secundária poderia ser /dev/sda5, seguida por /dev/sda6, etc.

Outra restrição de um formato de tabela de partição MS-DOS é que ela apenas permite discos de até 2 TiB de tamanho, o que está se tornando um problema real com os discos recentes.

A new partition table format called GPT (GUID Partition Table) loosens these constraints on the number of partitions (it allows up to 128 partitions when using standard settings) and on the size of the disks (up to 8 ZiB, which is more than 8 billion terabytes). If you intend to create many physical partitions on the same disk, you should therefore ensure that you are creating the partition table in the GPT format when partitioning your disk.

QUICK LOOK The Globally Unique Identifier (GUID)

Using GPT the partition type is represented as a 16 bytes long universally unique identifier, also known as Globally Unique Identifier (GUID), which is part of the UEFI standard (see NOTA UEFI, um moderno substituto para a BIOS). Compared to the hex code used to determine the partition type in the MS-DOS table format, you will have a hard time trying to remember these identifiers. Fortunately there are lists with all the IDs which you can use to create partition recipes to use with sfdisk or for preseeding the Debian installer.

→ https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

It is not always easy to remember what disk is connected to which SATA controller, or in third position in the SCSI chain, especially since the naming of hotplugged hard drives (which includes among others most SATA disks and external disks) can change from one boot to another. Fortunately, udev creates, in addition to /dev/sd*, symbolic links with a fixed name, which you could then use if you wished to identify a hard drive in a non-ambiguous manner. These symbolic links are stored in /dev/disk/by-id/. On a machine with two physical disks, for example, one could find the following:

mirexpress:/dev/disk/by-id# ls -l
total 0
lrwxrwxrwx 1 root root  9 23 jul. 08:58 ata-STM3500418AS_9VM3L3KP -> ../../sda
lrwxrwxrwx 1 root root 10 23 jul. 08:58 ata-STM3500418AS_9VM3L3KP-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 23 jul. 08:58 ata-STM3500418AS_9VM3L3KP-part2 -> ../../sda2
[...]
lrwxrwxrwx 1 root root  9 23 jul. 08:58 ata-WDC_WD5001AALS-00L3B2_WD-WCAT00241697 -> ../../sdb
lrwxrwxrwx 1 root root 10 23 jul. 08:58 ata-WDC_WD5001AALS-00L3B2_WD-WCAT00241697-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 23 jul. 08:58 ata-WDC_WD5001AALS-00L3B2_WD-WCAT00241697-part2 -> ../../sdb2
[...]
lrwxrwxrwx 1 root root  9 23 jul. 08:58 scsi-SATA_STM3500418AS_9VM3L3KP -> ../../sda
lrwxrwxrwx 1 root root 10 23 jul. 08:58 scsi-SATA_STM3500418AS_9VM3L3KP-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 23 jul. 08:58 scsi-SATA_STM3500418AS_9VM3L3KP-part2 -> ../../sda2
[...]
lrwxrwxrwx 1 root root  9 23 jul. 08:58 scsi-SATA_WDC_WD5001AALS-_WD-WCAT00241697 -> ../../sdb
lrwxrwxrwx 1 root root 10 23 jul. 08:58 scsi-SATA_WDC_WD5001AALS-_WD-WCAT00241697-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 23 jul. 08:58 scsi-SATA_WDC_WD5001AALS-_WD-WCAT00241697-part2 -> ../../sdb2
[...]
lrwxrwxrwx 1 root root  9 23 jul. 16:48 usb-LaCie_iamaKey_3ed00e26ccc11a-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 23 jul. 16:48 usb-LaCie_iamaKey_3ed00e26ccc11a-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 23 jul. 16:48 usb-LaCie_iamaKey_3ed00e26ccc11a-0:0-part2 -> ../../sdc2
[...]
lrwxrwxrwx 1 root root  9 23 jul. 08:58 wwn-0x5000c50015c4842f -> ../../sda
lrwxrwxrwx 1 root root 10 23 jul. 08:58 wwn-0x5000c50015c4842f-part1 -> ../../sda1
[...]
mirexpress:/dev/disk/by-id#

Note that some disks are listed several times (because they behave simultaneously as ATA disks and SCSI disks), but the relevant information is mainly in the model and serial numbers of the disks, from which you can find the peripheral file. While the links in /dev/disk/by-id/ are created using the device' serial number and physical path, there are more convenience links in e.g. /dev/disk/by-label/ (based on given labels), /dev/disk/by-uuid/ (based on unique identifiers, which can change when reformatting a device using mkfs.* or mkswap), /dev/disk/by-path/ (based on shortest physical path), and /dev/disk/by-partlabel/ and /dev/disk/by-partuuid/ (only partitions with GPT labels and their unique identifiers). If you use these links, e.g. in /etc/fstab, always prefer unique identifiers over labels. You can also obtain and change this information for each partition or device using the lsblk and blkid commands.

Os arquivos de configuração de exemplo dados nas seções seguintes são baseados na mesma configuração: um único disco SATA, onde a primeira partição é uma antiga instalação Windows e a segunda contém o Debian GNU/Linux.

ALTERNATIVE The LILO bootloader

O LILO (LInux LOader) é o carregador de inicialização mais antigo — sólido, porém rústico. Ele escreve o endereço físico do kernel a ser carregado na MBR, o que faz com que a cada atualização do LILO (ou de seu arquivo de configuração) deva ser seguida pelo comando lilo. Esquecendo de fazer, isso fará com que o sistema seja incapaz de inicializar, se o antigo kernel foi removido ou substituído, já que o novo não estará no mesmo local no disco.

O arquivo de configuração do LILO é o /etc/lilo.conf; um arquivo simples para configurações padrão é ilustrado no exemplo abaixo.

Exemplo 8.4. LILO arquivo de configuração

# The disk on which LILO should be installed.
# By indicating the disk and not a partition.
# you order LILO to be installed on the MBR.
boot=/dev/sda
# the partition that contains Debian
root=/dev/sda2
# the item to be loaded by default
default=Linux

# the most recent kernel image
image=/vmlinuz
  label=Linux
  initrd=/initrd.img
  read-only

# Old kernel (if the newly installed kernel doesn't boot)
image=/vmlinuz.old
  label=LinuxOLD
  initrd=/initrd.img.old
  read-only
  optional

# only for Linux/Windows dual boot
other=/dev/sda1
  label=Windows

As per request of the maintainer and upstream author of lilo, the bootloader has been removed from Debian 11 Bullseye and it is unlikely to make a comeback.

8.8.2. Configuração do GRUB 2

GRUB (GRand Unified Bootloader) is more recent. It is not necessary to invoke it after each update of the kernel; GRUB knows how to read the filesystems and find the position of the kernel on the disk by itself. To install it on the MBR of the first disk, simply type grub-install /dev/sda. This will overwrite the MBR, so be careful not to overwrite the wrong location. While it is also possible to install GRUB into a partition boot record, beware that it is usually a mistake and doing grub-install /dev/sda1 has not the same meaning as grub-install /dev/sda.

NOTA Nomes dos discos para o GRUB

GRUB can only identify hard drives based on information provided by the BIOS. (hd0) corresponds to the first disk thus detected, (hd1) the second, etc. In most cases, this order corresponds exactly to the usual order of disks under Linux, but problems can occur when you associate SCSI and IDE disks. GRUB used to store the correspondences that it detected in the file /boot/grub/device.map. Nowadays it avoids this problem using universally unique identifier (UUIDs) or file system labels when generating grub.cfg. However, the device map file is not obsolete yet, since it can be used to override when the current environment is different from the one on boot. If you find errors there (because you know that your BIOS detects drives in a different order), correct them manually and run grub-install again. grub-mkdevicemap can help creating a device.map file from which to start.

As partições também tem um nome específico para o GRUB. Quando você usa partições “classical” no formato MS-DOS, a primeira partição no disco é rotulada como, (hd0,msdos1), a segunda (hd0,msdos2), etc.

GRUB 2 configuration is stored in /boot/grub/grub.cfg, but this file (in Debian) is generated from others. Be careful not to modify it by hand, since such local modifications will be lost the next time update-grub is run (which may occur upon update of various packages). The most common modifications of the /boot/grub/grub.cfg file (to add command line parameters to the kernel or change the duration that the menu is displayed, for example) are made through the variables in /etc/default/grub. To add entries to the menu, you can either create a /boot/grub/custom.cfg file or modify the /etc/grub.d/40_custom file. For more complex configurations, you can modify other files in /etc/grub.d, or add to them; these scripts should return configuration snippets, possibly by making use of external programs. These scripts are the ones that will update the list of kernels to boot: 10_linux takes into consideration the installed Linux kernels; 20_linux_xen takes into account Xen virtual systems, and 30_os-prober adds other existing operating systems (Windows, OS X, Hurd), kernel images, and BIOS/EFI access options to the menu.

CAUTION error: symbol `grub_*' not found

One of the most often reported issues when using GRUB is that users get an error like error symbol `grub_calloc' not found and they are unable to boot the system anymore. Most of the time this error is caused by installing an updated version of GRUB that causes new modules in /boot/grub to be incompatible with old core images in the boot sector that your firmware jumps to when booting your machine. This happens on systems that are configured to run grub-install to a target device that is not actually the one that the firmware uses to boot your system (e.g. after replacing disks or moving them around - one can see the issue when running dpkg-reconfigure grub-pc showing the wrong target device). With the release of Debian 11 Bullseye (the change was also populated to Buster) the update process now checks for this issue and exits with an error in case it finds such a constellation.

→ https://bugs.debian.org/bug=966575#95

Setting up grub-pc (2.02+dfsg1-20+deb10u4) ...
/dev/disk/by-id/[..] does not exist, so cannot grub-install to it!
You must correct your GRUB install devices before proceeding:

  DEBIAN_FRONTEND=dialog dpkg --configure grub-pc
  dpkg --configure -a
dpkg: error processing package grub-pc (--configure):
 installed grub-pc package post-installation script subprocess returned error exit status 1

To fix the issue and continue the upgrade procedure, just follow the advice and run the commands given by the error message as root.

8.8.3. Using GRUB with EFI and Secure Boot

Using GRUB to boot either a traditional BIOS system (legacy or UEFI-CSM) or a UEFI system is quite different. Fortunately the user doesn't need to know the differences because Debian provides different packages for each purpose and the installer automatically cares about which one(s) to choose. The grub-pc package is chosen for legacy systems, where GRUB is installed into the MBR, while UEFI systems require grub-efi-arch, where GRUB is installed into the EFI System Partition (ESP). The latter requires a GTP partition table as well as an EFI partition.

→ https://wiki.debian.org/Grub2#UEFI_vs_BIOS_boot

To switch an existing system (supporting UEFI) from legacy to UEFI boot mode not only requires to switch the GRUB packages on the system, but also to adjust the partition table and the to create an EFI partition (probably including resizing existing partitions to create the necessary free space). It is therefore quite an elaborate process and we cannot cover it here. Fortunately, there are some manuals by bloggers describing the necessary procedures.

If you are using a system with “Secure Boot“ enabled and have installed shim-signed (see sidebar CULTURA Secure Boot e o carregador de boot shim), you must also install grub-efi-arch-signed. This package is not pulled in automatically, only if the installation of recommended package has been enabled.